Samsung Galaxy Watch 5, 5 Pro charging stand

Boost MeHello to my fellow designers, Printers, and creators.
My Name is Dan, and 3D printing is my No. 1 hobby and goes hand in hand with my day-to-day job as a medical device CAD Designer.
With a design background spanning the last 20 years, creating new designs is just my life. Getting into 3d printing during lockdown has opened up many design possibilities and really does fuel my passion.
If you like my designs and would like me to grow, please help me expand and boost me. thank you

Samsung Galaxy Watch 5, 5 Pro charging stand 3d printed to hold charging puck. 

Just insert the puck into the location. Run the cable along the tracks. The puck will be a snug fit depending on your print settings. You may have to adjust the model or carry out post-adjustments to print. I am happy to amend if you contact me. 

This model was printed with Creality Hyper Pla at 220 Nozzle temp, 60 bed temp and .2 layer height. The model was printed on the side with support. The Cable run was full of support and did take a bit of time to remove. Increase wall thickness until there is zero infill on the left thin section of the stand. This will give more strength there.