VW T1 HueForge Wall Art

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 220x125.71mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
    PLA+ Sunlu Black Transmission Distance: 0.5
    PLA+ Sunlu Sky Blue Transmission Distance: 4
    PLA+ Sunlu Red Transmission Distance: 6
    PLA+ Sunlu White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #9 (0.8mm) swap to Sky Blue
    At layer #12 (1.04mm) swap to Red
    At layer #19 (1.6mm) swap to White for the rest.

You can find the details in the documentation.

If you don't have a multicolor printer, you can find a guide to color printing using manual filament change in the PDF file.

If you like this, check this out too:

• Porsche 911 HueForge Wall Art: https://makerworld.com/en/models/731209-porsche-911-hueforge-wall-art#profileId-1079589

If you like my uploaded model, please take a look at my other works!