October 19, 2024
Description
This ONE-WALL-WONDER is designed for maximum speed of printing with out sacrificing basic functionality & aesthetics.
You can print one in probably less than 5 minutes with the right filament and settings in ludicrous Speed!
or print all six in still less time than most other single hygrometer stands.
This Hygrometer stand features precise & secure slots for ensuring that your text is level after you install your meter into it.
There are different angled slots to accommodate different manufacturing variations of circular embedded hygrometer designs.
(some are rotated about 32deg. to one side. The Bambu model as of this upload date uses the strait up and down slots.)
Please also check out my other models that you might like by clicking on this red text here!
!!!UP DATE!!!>>> There are more plates now with new styles of this Hygrometer stand <<<!!!UP DATE!!!
The second plate has more robust base and deeper walls around the sensor to be more color friendly if you want something other than black. more styles coming soon!
The SIX angled versions of one style are on one build plate. you can choose which ones to print in the prepare print dialogue in Bambu handy app, or you can start the print and skip the ones that you don't want to print, by using the skip item function in your Bambu Studio software or Bambu Handy app or directly from the printer if you have X1C.
Skipping is allowed in Bambu Handy App 2.1.1 and higher so you can start this print from anywhere and buy the meter now while it prints. if you by it through the link bellow in the BOM (Bill of Materials) it will ship from a ware house in the USA or some where closer to you if you are not in the USA region.
You can put your meter into this stand upside down and then use it as a stand at the complementary angle, for example the 20° angle stand will become a 70° stand.
( A NOTE ABOUT INSTRUMENT ACCURACY; For anyone who was wondering why the the meter in the middle is reading slightly higher RH than the other two its because I had it in the freezer twice as I was considering a cool time lapse video with a heat gun and a sonic flogger for dramatic effect but changed my mind, so the one in the middle still had some extra moisture it was reading from condensation because it was cold. but don't worry it normalized I have five of these sensors and they all work fine and they all read the same, I do recommend them. they are very handy to make sure you are not getting to much humidity that can lead to mold in bathrooms where lots of hot water is used etc. )
( A NOTE ABOUT DRYING YOUR FILAMENT: for my people who print this and give only four star **** rating because they are having layer adhesion issues between layers. this means your filament is not dry. it needs to be kept below 20% relative humidity in your AMS, and it should have been dried down to close to 10-12% RH at least once before used. you may think that your filament is dry because the air around your spool may be around 20%, but a few layers into the spool and the filament can still be holding several grams of water, that is why the spool needs to be dried and held at 10-12% for several hours to normalize the spool all the way to the middle. this model only has one wall so it depends on you doing your part to dry your filament properly more than usual. if your filament is dry, and your build plate is clean the model will print perfectly. if you are having layer issues that means you do not have dry filament. )
( A NOTE ABOUT PRINT PROFILE RATING: Print Profiles and model design are not the same thing. when you rate a print profile you are not awarding points to the model size, shape, or merit of the design functionality of the model itself. the print profile is only about things like Filament material type, speed, adaptive layering for smoothing top parts of soft radius to eliminate the appearance of steps for example. the number of top or bottom layers, the print pattern of top or bottom layers, the number of wall loops on first and last layer, the number of walls through out the print. the % of infill, the pattern of infill, how well it handles over hangs or bridging etc. does the print fail or finish not counting users who don't correctly understand the importance of drying their hygroscopic filament, (which ironically I would think more people on this page about a hygrometer stand would already know that.) or if you have finger oil all over the build area that prevents first layer adhesion. also if you are not a creator who has put a lot of hard work and hours of prototype design revisions to perfect a lean design you might not be aware that maker world only awards points to print profiles of models that maintain 4.0 stars or more.)
(A NOTE ABOUT THIS MODELS STRENGTH: this model will not fall apart if you print with dry filament, it will probably not break even if you throw it off a tall building, but this model is not super strong either, it is only holding a hygrometer that weighs 20 or 30 grams! and the models on the first plate are for sure the flimsiest, but consider when mom or dad steps on them in the dark with bear feet because the adult children who played with it last, left it on the floor. you will probably be very glad that it deflected easily under the several KG load of their tender supple feet, that it was never designed to withstand. its a feature not a bug. so please do not take stars away from an otherwise five star print profile that printed just fine because the design is flimsy. it is more than strong enough to just sit there on a counter top in your bathroom faithfully showing you the face of your round hygrometer at the optimal angle that you choose. As a ONE-WALL-WONDER it has only one wall that is 0.45mm wide. this is not a print profile issue anyway it is intended to be flimsy by design for the safety of you bear foot adult children borrowing from the future collage fund to buy rolls of plastic. I'm not picking on anyone here, I am just noticing a trend that seems to miss the point of the ONE-WALL-WONDER concept. so please do take this with a sense of humor. )
Each Model is also named with its corresponding degree in the models list.
And they are placed corresponding to the positions shown in this picture above.
It takes a few minutes to warm up purge etc. before it starts to print so you have plenty of time to skip the models that you want to skip before it starts printing, and you can skip any model at any time during the print if you change your mind later also.
License:
Standard Digital File License
3D Prince
