Mil Box print in place rugged tough container

This is a high strength box that can withstand many things including dust, crushing, dropping, and more.
It is printed in place (as one piece in one print) and uses very little and easy to remove support.
This box is water Resistant and not water Proof (Small amounts of water can leak into the compartment if submerged for long periods of time.

You could use this for camping adventures, hiking, airsoft, paintball, and much more, and your items will be secure and safe.
Stores batteries quite nicely, could be used for extra batteries for devices, including RC cars, drones, and other devices.

Note that the latch is stiff, it is like this for a reason so that it does not pop open during rigorous endeavors.

This containers internal dimensions (Storage capacity) is 130mm x 60mm x 25mm (LxWxH). And external dimensions (Total area of space the box takes up) of 140mm x 90mm x 45mm (LxWxH).

ATTENTION people of Makerworld, it has come to my attention that this model is very similar to another's.

Though this model is not based on YogiTech's Model, there are many distinctive similarities.

As these are highly similar i see it fair to share YogiTech's model.

You can find it here> https://makerworld.com/en/models/38255#profileId-42959 
Go check YogiTech's model out, it seems to be of good quality!