Magnetic Bit Holder for Ridgid Drill (Clip On)

This is precisely sized to snap securely on the back of the brushless driver. I recommend using PETG or PLA+ for durability and to avoid cracking due to the tight fit.

The basic version will hold bits without magnets or a base. It does not need supports.

The second version is made to use four 6x3mm magnets. I used slim tree supports to allow printing of the brackets which are off the print plate in this model. The bit slots are about 2% larger on the magnet version as well, to make the bits easier to remove.

The horizontal version is currently very tight. You can break it in with a tight fitting allen wrench or other long hex tool. I printed it with supports…

As noted in the comments, this won't fit all Ridgid tools. I don't know the models it fits, but I am adding dimensions from the model. Of course, tolerances depend on your printer and slicer settings.

For full functionality:

Insert a pause at about 3.84mm print height, press fit four 6x3 magnets!