October 20, 2024
Description
This is a remix of the original creator's. It includes a new tab on the mid plate to prevent the rubber band from sliding and gumming up the mechanism.
2-Digit Version - https://makerworld.com/en/models/825857#profileId-769449
From the original description:
Version 3.0 of the 7-Segment mechanical counter. Improved design. This particular model is a sequential counter (numbers 0 - 9) that receives a linear input to cycle the display. This version was designed and prototyped using the Bambu Lab X1 Carbon.
New for v3.0:
Quantities of each 3D printed component for a complete assembly:
(1) - BODY_v3.0
(1) - SEG_PLATE_v3.0
(1) - MID_PLATE_v3.1
(1) - BACK_PLATE_v3.0
(4) - SCREW_v3.0
(2) - SEG A_v3.0
(2) - SEG B_v3.0
(2) - SEG C_v3.0
(1) - SEG D_v3.0
(1) - CAM A1_v3.0
(1) - CAM A2_v3.0
(1) - CAM B1_v3.0
(1) - CAM B2_v3.0
(1) - CAM C1 _v3.0
(1) - CAM C2_v3.0
(1) - CAM D1_v3.0
(1) - CAM D2_v3.0
(1) - TIMING_GEAR_No1_v3.0
(1) - TIMING_GEAR_No2_v3.0
(1) - SPRING_v3.0
(1) - SPRING_R_v3.0
(1) - SPRING_DRUM_v3.0
(1) - SPRING_DRUM_R_v3.0
(1) - PUSH_ACTION_v3.1 (Updated 8/3/24, two options: coil springs (recommended) or rubber band)
(1) - PUSH_BUTTON_v3.0
Non-3D Printed Components:
(1) - Rubber band (recommended 2mm x 60mm, Size 16) - for D-segment
(1) - Rubber band (recommended 2mm x 100mm, Size 19) - for A, B, & C segments
(1) - Rubber band (recommended 3mm x 60mm, 2x Size 16)
General Settings:
Material: PLA
Layer Height: 0.2mm
Infill: 100%
Supports: No
Based on a 0.4mm nozzle
License:
BY-NC-SA
Ryan
