WMP VECTOR - WiiMote Pistol Vector Edition

Update 15/05/24: Released Wii Nunchuck Grip which is compatible with this design: https://makerworld.com/en/models/1415145-wii-nunchuck-grip-extras#profileId-1469545

Update 06/12/24: Added three hollow mags and a cap (Many thanks X3000 for idea) so that you can fill them with something (ball bearings, sand, old batteries...) to add some weight. Use a brim to print them securely stood up on the open end.

---

Here is my Wiimote pistol tribute to a real world weapon, the KRISS Vector.
I have always admired the design.

As with all my Wiimote pistols, you only require the body and trigger for it to function and pls keep in mind that because I can't predict the location of the Wiimote sensor (it needs to be above), then the in-game crosshair will never line up with the sights. I have thought about a design where the Wiimote is angled upward in the body and has some adjustability.

You will find some extra parts that I made after I did the images, like a smaller mag option (WV_Mag_Short), a shorter supressor (WV_S1_150mm) in case you have less headroom to print in and a longer stock (WV_Stock_288mm) if you have access to a 250x250mm bed.

I Hope this Wiimote Vector cosplay makes you smile :)

--PATREON & PATREON SHOP.
--https://www.patreon.com/3DFreeman

Thanks again for your continued support.