October 22, 2024
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 117.6x176.4mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
ePLA-SS eSUN Black Transmission Distance: 0.3
ePLA-SS eSUN Gray Transmission Distance: 3
ePLA-Matte eSUN Light Khaki Transmission Distance: 1
ePLA-SS eSUN Cold White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Gray
At layer #13 (1.12mm) swap to Light Khaki
At layer #20 (1.68mm) swap to Cold White for the rest.
License:
BY-NC
TrudTilp
