Arcs - 3d buildings - spaceport

Upgrade for Arcs board game cardboard tokens. I have created two options to choose from

 

Non magnetic (plate 3):

Single piece spaceport, you can see them in once of the pictures where once of the pieces is standing on the side (along the side with control tower). Easy print the only drawback is that in order to mark the damages building you nee to flip them on the side just like the ships.

 

Magnetic (plates 1 and 2):

Consist of base with a cut through whole for 2 x neodymium magnets each (3x2mm), and a detached city with a space for a steel flat washer M5 (outer diameter 10mm, inner diameter 5.3mm, height 1mm).

Because the two create a quite strong connection I had to use some contact glue - magnetic pieces got sometimes pull out of their sockets. Now if you assign damage you need to hold the city and disconnect the base, flip it and allow it to reconnect - very satisfying process :)

Assembly tips, for both washer and magnets I push it my finger than flip upside and force the printed part down, so it moves all the way in.

 

Let me know if you had success with upgrading your copy or any problem maybe I can figure something out.

 

Enjoy!

 

Find more Arcs upgrades at: https://makerworld.com/en/collections/2763701

 

Boost MeBoost to support creating more projects like this