HAN SOLO IN CARBONITE HUEFORGE

This is Han Solo in Carbonite. One of my favourite characters from the movies. Hopefully I have done justice to this iconic moment. I have used colours to produce the best effect.

Remember not to change the Z height if changing the size.

The Model is 73.1x220mm in size

I Printed on a P1S with a 0.4 nozzle.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 73.1x220mm in size
You may print at higher layer heights below the Min Depth of 1mm
The Max Depth is 3mm and the Actual Depth is 3mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #16 (1.36mm) swap to Red
At layer #23 (1.92mm) swap to Yellow
At layer #30 (2.48mm) swap to Jade White for the rest.