Magnetized Bambu Poop Chute for X1C, X1, P1P

Model

This chute is inspired by the model of adriangarside. It's designed to redirect this excess filament to the side of the printer

Design and attachement:

There are some smooth geometries on the inside for the poop to slide down.

It's slightly larger then the X1C Printer (see pictures) and the thickness the chute is 2mm.

I added 4 holes to glue in magnetic holders. Size of the magnets are <5mm in diameter. The depth of the magnet holes are 1,3mm.

Personally I use 1mm thick magnets, so they are underneath the contact surface and won't scratch the printers shell.

It uses 30,77g of filament and takes about 1h17min to print.