DESIGN INTENTS
- Replacing thumbsticks that are damaged on PS4 controllers
- Design for 3D printing (and not a blind replica of the original)
- Overhangs and bridges have been adjusted to work on any calibrated 3D printer
- Stick is a little bit longer (approx 3mm longer) to give more control while playing
PRINTING PARTS
- Orientation: STL is already oriented correctly
- Support: none required, support is part of STL
- Material: Any material will work
- Infill: Does not matter. 100% is fine
- Layer height: Works fine with 0.2mm layer height. Looks much better with 0.1mm layer height
REMOVING CENTRAL SUPPORT
After printing, simply snap off the X support from the bottom
----------------
[2024-06-01] Update
EDNation
