John Deere Tractor and Barn Hueforge 200x200

John Deere Tractor and Barn

Commercial License to sell my designs can be found here:

https://www.patreon.com/c/DoubleJDesigns3D

This was inspired by a gentleman who told me my New Holland Combine looked great but was the wrong color. His John Deere hat answered the follow up question I never had to ask.

The frame for this Hueforge is created by Canadian Gamer and is located here" “https://makerworld.com/en/models/381229#profileId-281475”

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic BambuLab Green Transmission Distance: 2
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA PolyLite White Transmission Distance: 5

This print uses 5 unique filaments. You can print this with 1 AMS by putting both the white and black colors under black on the selection screen. Once black finishes, switch it over to white as it prints the other colors and it will finish with white that is now in the black position.

Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Blue Gray
At layer #13 (1.12mm) swap to BambuLab Green
At layer #16 (1.36mm) swap to Yellow
At layer #21 (1.76mm) swap to White for the rest.
 

If you chose to resize the image, only change the X and Y value and not the Z axis as this will change the color sequence and change the final product results.