Valorant - Reaver 2.0 Ghost

Reaver 2.0 Ghost from Valorant

Printed on an X1C with AMS in two colours (Black and White). I suggest printing on a smooth plate to minimize the seam between the two halves.

Assembly:
1: If you would like to have a magnetic gunbuddy attached insert a 4x2mm (or smaller) magnet into the small slot on the flat side of the bottom half, push it down with a small allen key.
2: Put the connectors in and glue the two halves together
3: The silencer is threaded so it should just screw into the main ghost body easily :)

I will try to upload some gunbuddies for this soon, enjoy!