Puzzle Color Samples 1.0 - 拼图色卡 1.0

2023.11.25============================================================

买了bambu P1S没有送A1 mini那样的样本,自己做个

拼图色卡:
基本体积32x24x2.3mm,打印出来差不多2.5mm
字体高度0.6mm.加字厚度差不多3mm
提供无文字stl和文字参考stl,以及可修改的SolidWorks源文件,自己可修改;参考文字用的思源字体4号,太小打印不出来

挂架:
有两种模式:壁挂和桌面
Y柱上的孔洞在壁挂时候可以装m4x4磁铁,或者m4螺丝
桌面时候用来装稳固横杆.

向上可以叠加,横向叠加
按每片拼图3mm厚度计算,宽度-Y柱宽度8x2,大约可挂±20片.想更宽的可修改源文件,记得减去Y柱宽度8x2.

打印注意
半圆柱平面部分如有不规则需要打磨
Y柱用树形支撑(自动)

Bought P1S without receiving a sample like A1 mini, make one yourself.

Color card puzzle:
Basic volume 32x24x2.3mm, printed out to be about 2.5mm
Font height 0.6mm. Plus font thickness is about 3mm
Provide stl without text and stl with text reference, as well as modifiable SolidWorks source file, which can be modified by yourself; The reference text uses Source Han Sans font No. 4, which is too small to print.

Hanger:
There are two modes: wall-mounted and desktop
The hole on the Y-column can be equipped with an M4x4 magnet or M4 screw when wall-mounted
Used to install a stable crossbar on the desktop.

Can be stacked upwards and horizontally
Calculated according to the thickness of each puzzle piece of 3mm, the width-Y column width 8x2, can hang about ±20 pieces. If you want to be wider, you can modify the source file, remember to subtract the Y column width 8x2.

Printing attention
If there are irregularities in the flat part of the semicircular cylinder, it needs to be polished
Y-column is supported by tree-shaped support (automatic)