Toy Truck

For completion you need: 
- 6x bolt M4x25mm with countersunk head 
- 7x Nut m4 ideally self-locking

- 1x Bolt m4x20mm with a half-round head.
 

We start the assembly by inserting the lights into their position (if they are too loose, I recommend a drop of glue). Then we install the steering wheel and insert the M4 nut into the rear part. We slide it onto the frame and secure it with a screw with a half-round head. Now we can put the wheel in place. We thread the countersunk head screws through each wheel, insert the M4 nut into the frame and tighten it sufficiently so that the wheels can rotate freely. Now we will take the "Body holder" and slide it into the space at the end of the cargo bed, thread the "Short pin" and now click it into the frame. We will put the door on the cargo bed and now we can also secure the bed on the spot in the front part with the “Long pin”. If anything is unclear, please leave a comment.