地狱男爵-面具Hellboy

所需物料：

1. 胶水

2. 20个20mmX3mm或者20mmX2.5mm的磁铁(10个也够)

3. 绑带（用于固定在头部的绳子之类的东西）

Materials needed:

1. Glue
2. 20 magnets of 20mm x 3mm or 20mm x 2.5mm (10 may be enough)
3. Straps (something like a cord to secure it to the head)

模型1：1的尺寸大小，偏大一点点，避免头大的带不上，如果你的头小，可以根据你的尺寸缩放

Model 1:1 is slightly larger so it fits comfortably, even for larger heads. If you have a smaller head, you can adjust the size to fit better.

犄角和两侧胡子使用的是超强磁铁尺寸为20mmX3mm或者20mmX2.5mm。下巴处的胡子用的磁铁是6mmX3mm。一共20个大磁铁和4个小磁铁，磁铁不够多，胡子可以直接用胶水粘住。每个断角用一个，这样10个大磁铁就够了。

The horns and side whiskers use powerful magnets measuring 20mm x 3mm or 20mm x 2.5mm. The chin whiskers use magnets that are 6mm x 3mm. There are a total of 20 large magnets and 4 small ones. If magnets are insufficient, the whiskers can be glued directly. Use one magnet per broken horn, so 10 large magnets will be enough.

雪茄我是直接粘上去的，如果你有想法可以加个磁铁随时取下

I glued the cigar directly on, but if you'd like, you can add a magnet to make it removable.