Portable Laptop Stand for Travel 旅行便攜式筆記型電腦支架

I don't understand why some people are having support issues — sorry, but they haven't provided very good feedback.

I suspect there's something wrong with their support interface — either they’re not using a dedicated support material, or they’re not using PETG as a support interface for PLA.
If you don’t apply this printing technique, having the support interface and Z distance set to 0 in my print configuration will make the supports impossible to remove.
You’ll need to adjust this setting — specifically the support interface and Z distance.

我不明白為什麼有些人會遇到支撐問題，抱歉但他們沒有很好的回饋資訊。

我懷疑他們的支撐介面沒有使用支撐專用材料或是使用PLA對PETG異材質應用。如果沒有使用此列印技巧我的打印配置中支撐介面與Ｚ距離為0將會使支撐無法拆除。

The size is suitable for my macbook air 13.6, and may be enlarged or reduced to fit other different sizes.

大小適用我的macbook air 13.6，或許可以放大或縮小適用其他不同尺寸。

This "Portable Laptop Stand for Travel" is equipped with four sets of magnetic arrays inside, effectively holding all the components together to prevent scattering in your backpack. When needed, the user can simply take out the hidden horizontal bar inside, insert it into the designated slots, and quickly assemble the stand without any tools.

這款「旅行用便攜筆電支架」其內部配置4組磁鐵陣列，能有效地將各個零件組合，避免在背包中散落。當需要使用時，使用者只需輕鬆取出隱藏在內部的橫桿，插入孔，即可迅速組裝完成，無需任何工具。

Printing Instructions: During the print, pause and place 5x5x5mm magnets (optional if you don’t have them; versions supporting other magnet sizes will be added in the future). Use support material for the horizontal bar slots, and print with PETG and PLA for multi-material support.

列印說明:使用暫停列印時放置5x5x5mm or 30x10x3mm磁鐵(如果你沒有可以不放，未來將加入其他尺寸的磁體版本)，橫桿插槽的支撐使用支撐材料，PETG與PLA的異材質。

The size of 4.7x4.7x4.7mm is based on my existing magnet design. 

Its specification is 5 cubic meters but it is actually 4.7 cubic meters.

I added the correct 5 cubic configuration file.

The size of 30x10x3mm is designed based on the materials in Maker's Supply, and the settings may need to be fine-tuned depending on the printer.

4.7x4.7x4.7mm的尺寸是依照我現有的磁鐵設計，他的規格是5立方實際卻是4.7立方。

我新增了正確的5立方的配置檔案。。

30x10x3mm的尺寸是依照Maker's Supply中的材料設計，依照列印機不同可能需要微調設定。

**The magnet hole is designed to be smaller so that the magnet can just get stuck and not be attracted by the nozzle and fall out.

**磁鐵孔設計的較小，使磁鐵可以剛好卡住，不被噴頭吸引而掉出