Poop Chute Boot - Tailored for X1/P1 Series

🚀 “Poop Chute Boot" [v2] - Purge Chute Lever Cover

Boost MeCreating a model isn't the easiest task in the world, not to mention a print profile that works for everyone along with it. We kindly ask that if our model worked for you and the print profile was seamless that you please give it a BOOST. We take pride in our daily operations and do our best to maintain updated models plus respond to feedback (we implement a lot of user feedback into our models!) Thanks to each and every one of you that have already boosted! Happy Printing!

The "Poop Chute Boot" is an innovative accessory designed specifically for the P1 Series and X1 Series. This part addresses a common noise during the printing process: filament residue accumulation of the “Purge Chute” A.K.A “The Poop Chute”

💬 INTRODUCTION ~ ~ ~

The design of the Poop Chute Boot ensures seamless integration with Bambu Lab's X1 & P1, allowing for EZ installation and removal without interfering with the printer's functionality. Started to notice how loud our original printers were versus newer models we purchased. Given the loose fitting of the stock ones and the ability of them becoming lost in the abyss. I modeled this enhanced version for everyone!

~NOW AVALIABLE ON PRINTABLES~

💡 BACKGROUND ~ ~ ~

Flippity - Jippity - KabLAam!

 

⏰User-Friendly Design 

Its simple, user-friendly design facilitates effortless installation and removal, requiring no additional tools or complex procedures.

😎Functionality

Dampens lever contact on purge chute door! Overtime this becomes louder (also you might find it in your bins or bottom of your printer), not with this on though!

✅ BILL OF MATERIALS ~ ~ ~

• Printed using 95A TPU

• PLA/PETG work (PLA Not Recommended) If you don't Have TPU on hand BUT TPU IS STRONGLY RECOMMENDED!

🛠️ INSTALLATION ~ ~ ~

1. Remove (Purge Chute Door Lever) it's held on with (1) Allen head screw *Critical* ~ DO NOT loose screw or bushing!
2. Take lever off after removal, set aside components for reinstallation. (Screw & white rubber bushing)
3. Take Poop Chute Boot & Slip on as if you were putting on shoes. (Boot should be a snug slip on fit)
4. After comfirming boot is attached properly (Prongs facing operator)
5. Reinstall Purge Chute Lever with screw set aside from operation #2 *Critical* ~ DO NOT OVERTIGHTEN! Snug to Resistance!
6. Enjoy the dampened effects every purge and never worry about loosing it again!

📝 CHANGELOG ~ ~ ~

[*] = Latest Revision

 

• *07/12/2024 - Updated Descriptions - Color Text identification - Model Profile Image - Boost Me Feature

• 12/04/2023 - Added [v2] .RAW .STEP File [Enhanced Thickened Prongs] Model install Photos & Function

• 11/30/2023 - New TPU Print Profile Added - [Adjustment to Prongs for Rigidity]

📣 MENTIONS ~ ~ ~

Thank you!

We sincerely appreciate the feedback and all the comments we've gained over the time of this release!

Please (if it worked) Boost the Model!

*Latest 4 -to- 1 PTFE Adapter! - Check it out!

🌟🌟🌟🌟🌟

Any ❓ or concerns please don't hesitate 📬 us!

 If you enjoyed our model please Like, Share, or Boost!