Air Quality Monitor Wall Mount / Backplate

A Mounting Bracket to attach your Air Quality Monitor (AQM) to the wall. I created two versions, one with screw holes around the perimeter and one without (to stick it to the wall).

Designed to be used with this Air Quality Monitor - https://geni.us/AirQuality 
(Amazon Affiliate Link, this means I can earn a small commission from a sale, but don't worry it doesn't cost you any more).

Assembly

Push out support material using 2mm drill bit

Remove the four screws on the back of the AQM

Place the AQM on the mount

Use the same four screws to attach the mount to the AQM from the rear.

Secure to the wall.

Print Notes

This model is an easy print. I would recommend PLA.

• Nozzle: 0.4mm
• Layer Height: 0.20mm
• Infill: 15%
• Orientation: Back of mount onto print bed
• Supports: Yes, auto
• Brim: None
• Top Shell Layers: 4
• Bottom Shell Layers: 3
• Wall Loops: 2
• Top Surface Pattern: Montonic
• Bottom Surface Pattern: Archimedean Chords

23 grams per build and takes 39 minutes.