Modular Filament Storage - With Benchy Snap on

The Ultimate Modular Filament Storage - With a Benchy Snap on, Fully Printable!

Make your own filament storage how you want it!

The Different Parts are:

Rods:

• Small Bar 14cm
• Vertical Bar 22cm
• Long Bar 29cm with X marks (For the benchy snap on)
• A 25cm Long Bar. An smaller alternative to the 29cm Bar.
• A 32.5cm Long Bar. Also an alternative to the 29cm Bar.

Connections:

• 3-Way Corner Connection
• 3-Way Straight Connection
• 4-Way Corner Connection
• 4-Way Straight Connection
• 5-Way Connection
• 6-Way Connection

• And of course the Benchy snap-on.

The Rods are 25mm in diameter.

This set up costs you about 85 Grams of filament per spool which is a very reasonable price for a fully printable spool rack in my opinion!

• 26 spools rack is 2.25kg. 

  Size: 54cm in height, 75cm in width and 21cm in depth(Spools on top not counted).

  About 85g per spool

   

• 18 Spools rack is 1.2Kg.

   About 66g per spool

   

• 8 Spools rack is 750g. 

  About 93g per spool

   

If you encounter difficulties printing the connections, I’ve included some easier-to-print profiles at the end of the print profile list.