A phone holder for 3/8 inch tripod.
It was made for my Samsung Galaxy Note 10+ but should fit other phones too.
I've printed mine with PLA at 0,2 layer height.

The most problematic part is thread because it has to be printed pretty precise.

BOM:
2x M2,5x8 bolt + nut
1x M5x30 bolt
1x M5 threaded rod (110mm)
2x M5 nut
1x M5 thin nut (or normal nut, sanded down to around 2,5mm thickness)

You need to print 1 piece of every STL file besides "Mocowanie 3" which needs to be printed twice.

Made with SOLIDWORKS

EZT T1 Delta

No

20%