November 1, 2024
Description
🎨 NEW v2 with Full Multi-Color support now available:
https://makerworld.com/en/models/1960255-interlagos-brazil-3d-miniature-v2
3d miniature of Interlagos Circuit in Brazil!
Includes an AMS-compatible multicolor print profile highlighting the racetrack!
Check out my collection of other Motorsport Miniatures: https://makerworld.com/en/@jarvizar/collections/450282
Collection of all my miniatures: https://makerworld.com/en/@jarvizar/collections/146964
Model created in Blender primarily using data from the Blosm addon.
This model was designed to be printed with a 0.4mm nozzle and 0.16mm layer heights.
Try using a 0.2mm nozzle (0.08mm layer heights) or scaling up for even finer detail!
Note: If roads or other small details disappear after slicing, try lowering the extrusion/line width of external perimeters (outer walls) closer to 0.4mm OR use Arachne walls (can also enable “Detect Thin Walls”).
The included “Designer Profile” should have the above settings pre-applied and is ready to slice & print!
Filament used in photos: Sun-lu Matte White (miniature), Bambu Matte Charcoal/Black (frame), Sun-lu Sky Blue (water)
This model measures almost exactly 6.7in by 4.7in (170.5mm X 119.5mm) and should fit most 5x7 frames (assuming frame lip/overlap is around a quarter inch). Feel free to change the scale/size of the model(s) to meet your needs.
Personally I use these cheap frames from Amazon: https://www.amazon.com/dp/B0C8HY7YSQ
And blue printer paper: https://www.amazon.com/dp/B00006IDQT
I also included a fully printable frame designed to fit all my miniature cities.
A frame is not required! This model looks great by itself and can be displayed almost anywhere.
See my Patreon for a commercial license, early downloads, polls towards future models, and more!
License:
Standard Digital File License
jarvizar
