Paws in Snow Bookmarks (HueForge)

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu White Transmission Distance: 1
This print uses 2 unique filaments

 

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to White for the rest.

 

 

Unfortunately I could only upload 3 out of 4 as a single .stl, otherwise the 500 MB limit would have been exceeded. However, the .3mf file contains all 4 bookmarks and you can choose the one you like best.

 

 

If you want to change the size, it is very important to make sure that only the X and Y size is changed and Z remains the same.

 

Happy printing!

Boost Me