Death Moth

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 150x150mm in size

You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2mm

Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Orange Transmission Distance: 5
PLA+ Numakers Pure White Transmission Distance: 4.8

This print uses 4 unique filaments

Swap Instructions:
Start with Charcoal
At layer #21 (0.96mm) swap to Blue Gray
At layer #27 (1.2mm) swap to Orange
At layer #35 (1.52mm) swap to Pure White for the rest.