Matte Moth

Careful around the antennae when removing from plate.

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 150x150mm in size

You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Basic Beige Transmission Distance: 8
PLA BambuLab Matte Dark Red Transmission Distance: 1.5
PLA BambuLab Matte Mandarin Orange Transmission Distance: 3
PLA+ Numakers Pure White Transmission Distance: 4.8

This print uses 5 unique filaments

Swap Instructions:
Start with Charcoal
At layer #19 (0.88mm) swap to Beige
At layer #24 (1.08mm) swap to Dark Red
At layer #28 (1.24mm) swap to Mandarin Orange
At layer #36 (1.56mm) swap to Pure White for the rest.