November 3, 2024
Description
Project: red.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 3mm and the Actual Depth is 3.1mm
Filaments Used:
PLA Smartfilm recycled Black Transmission Distance: 0.6
PLA BSmartfilm recycled Red Transmission Distance: 4
PLA Smartfilm recycled Yellow Transmission Distance: 6
PLA Smartfilm recycled White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Red
At layer #19 (1.6mm) swap to Yellow
At layer #27 (2.24mm) swap to Jade White for the rest.
License:
BY
quikytona
