轨道逻辑棋Orbital Logic Chess

轨道逻辑棋Orbital Logic Chess

 

轨道逻辑棋，参考了双人棋游戏《ORBITO》，是一款快速的双人对战策略游戏，有助于开发空间思维和动态记忆力，也是亲子互动的好选择。

Orbital Logic Chess, inspired by the two player chess game ORBITO, is a fast two player strategy game that helps develop spatial thinking and dynamic memory, and is also a great choice for parent-child interaction.

 

组装步骤如下：

The assembly steps are as follows:

 

游戏规则：
1、游戏双方各有8个棋子，每个玩家选择一种颜色棋子，由双方玩家自由决定下棋的先后顺序。
2、第一局：双方先后各放置一颗棋子,由第二个下棋的玩家按下立柱顶帽使棋盘上所有棋子按固定方向前进一格。
3、第一局后：玩家可先任意移动对方一枚棋子到空位上，然后放置一颗自己的棋子，随后按下立柱顶帽使棋盘上所有棋子按固定方向前进一格。
胜利条件：
任意一方的四颗棋子先组成一条线（横线、竖线、斜线均可）即视为胜利。

Game rules:
1. Each side of the game has 8 chess pieces,each player chooses a color chess piece, and both players are free to decide the order of playing.
2. In the first game, each player places a chess piece, and the second player presses the top cap of the pillar to move all the chess pieces forward in a fixed direction.
3. After the first game: Players can first move an opponent's chess piece to an empty space, then place their own chess piece, and then press the top cap of the pillar to move all chess pieces on the board forward one square in a fixed direction.
Victory conditions:
The first line formed by the four pieces of either side (horizontal, vertical, or diagonal) is considered victory.

注意：3d打印的球体棋子拆除支撑后，请尽量将支撑位置打磨光滑，否则有可能影响棋子移动质量。

Attention: After removing the support of the 3D printed spherical chess piece, please try to polish the support position as smooth as possible, otherwise it may affect the quality of the chess piece's movement.

 

如果3d打印的球体滚动性不佳，可自行选购实心木球或玻璃球，需购买两种颜色小球共计16个，每种颜色8个，直径28mm最佳。

If the rolling performance of the 3D printed sphere is poor, you can choose solid wooden balls or glass balls by yourself. You need to purchase a total of 16 small balls in two colors, 8 of each color, with a diameter of 28mm being the best.

Boost Me如果你喜欢我的设计，请助力我，你的支持是我原创设计的重要动力。
If you like my design, please boost me. Your support is an important driving force for my original design.

 

优化更新：

将十字支架结构改为上下两片，防止跷板脱落，优化后的十字支架结构已单独上传打印配置，打印了模型的朋友们可直接单独打印，还没有打印的可直接打印整体模型即可。

Optimization update：

The cross bracket structure has been changed to two upper and lower pieces to prevent the seesaw from falling off. The optimized cross bracket structure has been separately uploaded for printing configuration. Friends who have printed the model can directly print it separately, and those who have not yet printed can directly print the entire model.