Red and Orange Moth

Careful around the antennae when removing from plate as it is fragile. I recommend a scraper to free them up.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150x150mm in size

You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Matte Mandarin Orange Transmission Distance: 3
PLA Sunlu White Transmission Distance: 9

This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Red
At layer #15 (1.28mm) swap to Mandarin Orange
At layer #21 (1.76mm) swap to White for the rest.