November 4, 2024
Description
-This Model Requires TPU Plastic
-When printing the buckle, select a more rigid filament type. As I have experimented with a variety of filaments, PLA doesn't always work. Only the rigid filaments like certain PLA, ABS, and PETG will yield good results and tension.
-I Highly Recommend Using my Print Profiles as there are certain niche settings that need to be in place for (hopefully) optimal printing.
-Wait for the Buckle to COOL COMPLETELY after printing. Not doing so could ruin the spring.
-2 Buckle Styles
-4 Belt Sizes
-Trusted Print Profiles
-You'll be the cool person at parties.
-You'll be coerced into printing other people their own belts.
-No taking off the belt of shame at TSA.
-It's all plastic; the buckle isn't invincible, but it is replaceable.
-It's very flexible (duh). You could fold/bend this thing many times and it will (almost) always spring back.
I have now added a theoretically customizable magnetic belt attachment print profile! Wow that's a lot of descriptive words!
-Firmly Grip the two edges of the belt until it bends upwards. -Slide The belt into the bottom slot- making sure that the bend goes over the peg. -Once everything is aligned, give the belt a little push to secure everything. | |
-To remove the buckle, press firmly from the other side of the belt creating the bend again. - Squeeze the two edges of the belt as hard as you can while slightly pulling away from the buckle. |
Happy Printing!
License:
Standard Digital File License
Jeff M
