Blue Moth

Use care when removing releasing from the plate. I recommend a scraper to loosen the antennae.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150x150mm in size

You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Matte Marine Blue Transmission Distance: 0.5
PLA+ Numakers Pure White Transmission Distance: 4.8

This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Blue Gray
At layer #12 (1.04mm) swap to Marine Blue
At layer #15 (1.28mm) swap to Pure White for the rest.