November 4, 2024
Description
Body is scaled to fit Bronco/Defender Chassis
Print one of everything, except the push_bar which needs two prints.
Hardware needed:
Qty. 8: M2x4x3.5mm melt-in threaded inserts (4 are for the body clips, 2 in the light bar, and two in the front chassis clip)
Qty. 8: M2x6 bolts
Qty. 4: 1/8"x30mm steel rod
Qty. 1: 3D Gloop or similar glue
Rear Chassis clip is the stock Bronco bumper cut down to just the body clip part
Light Bar is Injora part number: 4M-47
License:
BY-SA
512 Designs
