Christmas Pokemon - Water Starters

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic Red Transmission Distance: 4
This print uses 3 unique filaments

Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Jade White
At layer #13 (1.12mm) swap to Black
At layer #14 (1.2mm) swap to Red
At layer #22 (1.84mm) swap to Jade White for the rest.

Different brands can be used but may look different from the picture!