10" Delta Cruzer Zero Clearance Plate

I figured why not, It took a couple of revisions but it sits well in the stock location and holds up well.

I've printed them in pla, pla-cf, and asa, all hold up equally, it's more about your settings than the material.

I printed at 6 walls with 50% infill and it's a solid part to use.

I have to split it up for my X1, but I've also uploaded a full length single part model as well if your printer can handle it. On the two part, the joint or parts are held in place by the center screws.

Use the exact same screws that you removed from the stock plate to install this new plate!