November 5, 2024
Description
Filaments I used as showed in the images:
Socket I used: IKEA STRÅLA, 6 EURO, Link: https://www.ikea.com/at/de/p/strala-lampenaufhaengung-weiss-20366404/
Bulb I used: IKEA LUNNOM E14, 4.99 EURO, Link: https://www.ikea.com/at/de/p/lunnom-led-leuchtmittel-e14-200-lm-dimmbar-roehrenfoermig-klarglas-80516962/
This IKEA socket and bulb won't get hot, I was lighting it over 2 hours and the temperature just like my finger, so 35-38 c degrees, PLA will do it just fine.
No hardware or tools are needed. Bolts and nuts with 0.16mm layer height, other components 0.2mm are fine.
Important: Slow the print speed down for the shade !
The finished lamp height is exactly 40cm.
Due to the size limit, A1 Mini is not supported by default model, however you can try to down scale on your own, but I didn't test the tolerances.
Enjoy your print!
License:
Standard Digital File License
HX8 3D Design
