Circle Pen

I just wanted something with a different shape and came up with this circular design. I think it would be a nice addition to your keychain.

You'll find two designs here…

1. The first ( a "circle" ) one with one BIC pen cartridge
2. The second one (an elongated circle ) with two BIC pen cartridges for two different colors.

Print Settings

I almost always use standard settings as a starting point and tweak some parameters based on the filament I use or the characteristics I need from the final print.

For this one, I used 0.2mm default settings with 5 perimeters for better print movement and speed. You may have to change the flow rate of your printer to find the best fit for the BIC refills

There is no need for support on this print.

Additional material

You will need one or two classic BIC pen cartridges.

Assembly

All the assembly is pretty straightforward. Just put the BIC pen cartridge inside the pen holder till the end. That's it!

For any questions feel free to contact me in DM's or comment on the print page! I'll be happy to answer all your questions and make some modifications if you want!

Happy printing and remember… “Life is a prototype”