Pitbull hueforge #1

Description

This is my first try on creating a hueforge print from scratch!

 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

 

Filaments Used:
PLA BambuLab Matte Charcoal Black Transmission Distance: 1.3
PLA BambuLab Basic Gray Transmission Distance: 3.4
PLA BambuLab Basic White Transmission Distance: 8.7

 

This print uses 3 unique filaments

 

Swap Instructions:
Start with Black
At layer #7 (0.66mm) swap to Gray
At layer #11 (0.96mm) swap to White for the rest.

 

!!! PLEASE POST YOUR PRINT RESULTS IN THE COMMENTS !!

Boost Me
Feel free to support my work by boosting this model..