X1C / P1S / P2S Buildplate light for LED Kit 001

If you have ever looked in to your printer and thought to yourself: I whish there was an easy way to get some extra light in there… this is the thing for you!

An easy to print and assemble extra light on top of your printer illuminating the build area.

It makes use of the Bambu Lab LED Light Kit. It is powered by USB and it has an actual on/off button, so it is very easy to install and use.

• No soldering
• No cutting wires
• No risers
• No LED strips
• No modifications
• Uses Bambu Lab LED kit 001
• Plug and Play

It is securely mounted on the top glass handle without changing or modifying anything and you can still lift the glass like normal. It can be removed again without any damage… Super easy install!!!

See pictures for easy install method.

• Step 1: Slide the empty frame on the handle
• Step 2: Insert the light, choose which way the power cord goes
• Step 3: Put the lid on with the power cord going through the slot
• Step 4: you are done, there is no step 4. It is that easy!

Print it, assemble it and there will be light!

See it in action here:

Halfway through the print I flipped the switch…