New York City Lower Manhattan 3D Miniature (Large)

Large 3d miniature of lower New York City!

 

Model created in Blender using the Blosm addon.

 

 

Check out my collection of other Large miniature cities: https://makerworld.com/en/u/1935755220/collections/468505

 

Collection of all my miniatures: https://makerworld.com/en/collections/146964

 

Smaller version of Lower NYC: https://makerworld.com/en/models/106264

 

 

This model was designed to be printed with a 0.4mm nozzle and 0.16mm layer heights.

Try using a 0.2mm nozzle (0.08mm layer heights) for even finer detail!

 

Note: If roads are disappearing after slicing, try or lowering the extrusion/line width of external perimeters (outer walls) closer to 0.4mm OR use Arachne walls.

 

Framing Details

 

This model measures almost exactly 7.5x9.5in (242.31mm X 191.08mm) and should fit most 8x10 frames (assuming frame lip/overlap is around a half-inch). Feel free to change the scale/size of the model(s) to meet your needs.

 

I also included a large printable frame (w/ 1mm water plate) designed to fit my large miniature cities!

 

Note: This is a “large” miniature and will not fit the smaller ~5x7inch printable frame included with the other miniature cities!

 

Personally I use these cheap wooden frames from Amazon: https://www.amazon.com/dp/B0B1CNJL7N

And blue printer paper: https://www.amazon.com/dp/B00006IDQT

 

A frame is not required! This model looks great by itself and can be displayed almost anywhere.

 

MembershipSubscribe for a Commercial License to sell physical prints of my models! License stays valid as long as the subscription is active.