19-inch Modular Rack Mount Blanks

A 1U rack-mount blank for 19-inch racks. Printed in two parts.

 

I've included two versions. A solid one, and another with a honeycomb pattern. Both are 4mm thick.

 

This mount is part of a 19-inch modular rack mount system I designed, you can mix and match the modules with other mounts. Take a look at my models here to find out the other 19-inch mount modules.

 

I've also added the .step file for the blanks, which should facilitate making remixes that are compatible with my modular system.

 

Boost MeI make these models for free, and it takes time and material to test them out. Your boost will help me keep releasing new models! Thank you!

 

Do you like my models? Consider buying me a coffee ;)

Parts

• 3x M5 screws (Min size: 12mm, recommended size: 16mm).
• 3x M5 hex nuts.
• OBS.: The mounts should also work with M4 screws and nuts.

Assembly

OBS.: The modules used in this tutorial are only for illustration purposes, and I'm using it for the whole series. It might not reflect the models you download at this page.

• To assemble the parts, insert the 3 screws into the Right module.

• Then align it with the Left module.

After that, insert the hex nuts in the screws, and using a screwdriver or allen key.

• Tighten the screws until you start feeling resistance and the nuts are securely into place. After that, you can install the mount in your rack.

Print Settings

Rafts:

Doesn't Matter.

Supports:

No.

Resolution:

0.2 or 0.24

Infill:

20% or more

Filament:

PLA/PLA+/PETG/ABS/ASA/Nylon