voronoi sphere

voronoi sphere

minimalist decorative voronoi sphere in two sizes

pieces dimensions in mm:

• standard ~ 70mm diameter
• mini ~ 50mm diameter

you will need to clean the brim (easier to do with a small deburring tool), and you may run into some stringing due to the geometry, especially if the filament isn't fully dry · this clears aways easily with a couple of passes with a heat gun

the profile has fuzzy skin enabled to give a textured look, which also makes it consistent as there are some overhangs

photos show printed in different matte and marble plas

• .40mm nozzle
• .16 layer height
• 10% cross hatch infill
• fuzzy skin on all walls (0.2 / 0.2)

notes

• includes bambu studio 3mf files and STLs (70 and 50 mm)
• all photos uploaded are of the actual printed model, and are copyright protected
• if you enjoy this model please consider to buy me a coffee
• commercial licence membership available on my patreon