November 10, 2024
Description
Project: erza.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x196.72mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.6mm and the Actual Depth is 2.7mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA Smart Recycled Red Transmission Distance: 4.4
PLA BambuLab Basic Orange Transmission Distance: 5
PLA BambuLab Tough Vermilion Red Transmission Distance: 3
PLA Smart Recycled Coral Transmission Distance: 2.2
PLA Smart Recycled Yellow Transmission Distance: 9.3
PLA Default White Transmission Distance: 5.1
This print uses 7 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Red
At layer #14 (1.2mm) swap to Orange
At layer #17 (1.44mm) swap to Vermilion Red
At layer #21 (1.76mm) swap to Coral
At layer #22 (1.84mm) swap to Yellow
At layer #26 (2.16mm) swap to White for the rest.
License:
BY
quikytona
