A1 Side Spool holder with top AMS

A bracket to use the original spool holder in combination with the top mount AMS.

No loose spoolholder next to the printer or heavy extra on top.
This requires less space and keeps the weight on the bottom.
Original Bambu Lab brackets are required.
No need to print these again, this bracket fits in original rear bracket.

Print the 2 parts, place them in the bracket and use 4 M3x12 screws.

 

NOTE: 

Left side version not compatible with the newest version spool holder from Bambu.

The non detachable head cant be used.

 

recommended: 

AMS Lite Hub Protector

https://makerworld.com/en/models/838287#profileId-783952

AMS Lite Top Mount Strong Buffers
https://makerworld.com/en/models/743880#profileId-676584

Boost Me

For use on AMS Lite Top Mount for A1 from Bambu Lab
https://makerworld.com/en/models/92486-ams-lite-top-mount-for-a1#profileId-100105

 

edit:
Works great in combination with the AMS Lite Splitter for A1 by Deviian
https://makerworld.com/en/models/118081#profileId-126946

Do not cut the ptfe tube, use a new extra piece 40 to 60mm to use between splitter and extruder.

And add 2 Cable clips from Michal and you have a clean setup.

https://makerworld.com/en/models/438261?from=search#profileId-343656