25 Point Star Christmas Tree Topper Voronoi

Due to the comment of the broken points (but please see my comments of warning below) I have added Version 2. 

In cover picture, Version 1 is on left (more delicate, extremely hard to remove from plate) and Version 2 is on right (stronger, much easier to remove).  

I wanted a very delicate and intricate star so I created the original.  In order to help people that have concerns about the fragility of the star I have created a second version that has thicker walls and more/smaller voronoi texture.  

The file is large as the stars are very intricate.  Please be patient with the download.

25 point star with a hole in the base if you you'd like to make it a Christmas tree topper. The hole can also be used to insert lights to make it pretty at night! It is delicate so when removing from the plate, take care. 

If you print Version 1,  recommend you CUT the supports from the bottom spikes of the star.  Version 2, the supports twisted off for me.

The rest of the supports come off pretty easily. It is a one piece print and at 100% takes up pretty much the entire bed. I had success scaling it down to 50% so you can customize to your desired size.

Version 1

Silver Star - .6 nozzle, a1 with frostbite, silver silk PLA+ off brand

Gold Star - .2 nozzle, a1 with frostbite, gold silk PLA off brand

Clear/White Star - .4 nozzle, p1s with frostbite, clear PETG off brand

Version 2

Clear/White Star - 4 nozzle, p1s with frostbite, clear Kingroon PETG