Magnetic Helical Gear Fidget

Designed this gear fidget, using gears from the STLGears generator. It uses 6x3mm magnets to hold everything together. Designed with two options. Can use 4x magnets for the gears to just spin together. Or you can use 14x magnets for a clicking fidget. See photos for magnet placement options. Make sure magnet poles are all aligned the same way. Depending on your filament/printer, you may need a drop of glue to hold the magnets in place. Profile is set to print by object, can print each part a different color, or all the same.

Feedback and boosts are always welcome, thank you!