Batman Inspired Sign LED with Wall Mount

This is a remix of Scarla's design and model of Batman Sign LED Wall Light. I wanted to add a mounting bracket that I could screw into a stud. Since I had to remake it from scratch in Fusion, I sliced it differently then the original model as well. I sliced it so that the center that has the clips for the wall mount are centered and not on a seem. I tried to keep to the original model as close as I could (I kept the the holes that were used for wire hanging it) but they might not be the EXACT size or location as the original model.

I mounted the wall mount with two counter sunk drywall screws. It holds the weight of the sign without any issues. The wall mount is in the 3mf files on its side so that it is stronger when it is mounted to the wall. If you rotate that orientation to flat on its back the layers may be a little weaker. I tested both orientations and they did hold the sign fine.

This should not require any supports or brims, however the plugs for fitting the pieces together might work better with brims if your printer isnt calibrated well.

Ive added the Bambulab LED Strips that would work. You can either use the WS2812B or the 6500K White Strip. I used one for my 0.4mm nozzle print and my 0.6mm nozzle print.