Onion Storage Bin for Kitchen or Pantry

Part of a set! - see the Potato Bin here: https://makerworld.com/en/models/711329#profileId-641759

This onion bin maximizes the print size of the P1 and X1 series printers to get it as large as possible (without mods to the printer). It has a soft ribbed pattern on all the walls to reduce contact surface area and a matching lid.

For a perfect lid, you may want to remove the priming filament line the printer creates at the start. Otherwise it will be connected to the lid.

As this is a food storage print, you may want to consider what filament you use to print and/or use a food-safe silicone spray to coat the inside of the box. I leave it to your discretion and personal research to decide what you will do.

The lids are compatible between the potato and onion bins. You can also stack them. If you plan to always stack the onion bin on top of the potato bin, you could even glue the potato lid to the bottom of the onion bin. Then it would sit snugly without sliding.

Note: Onions produce ethylene gas when they ripen. This the molecular weight of ethylene gas is very slightly less than air so it will tend to rise. As such, it's best to store the onion box on top of your potato box.