Lanterne LED Lamp Kit-001-model X

What would you like as a return to a time without electronics and pure romance with a lit lantern.
I wanted to appropriate this inspiration from this romance and started researching and bringing history into the modern era. I found this lantern, which was usually used on carriages.

Assembly and installation:

Insert the LED Lamp Kit 001 onto the base plate and stick it with the included double-sided adhesive. Insert the cable into the channel and lightly glue it to make it fixed. That's how the base plate is ready.

Take the part with the reservoir and insert two filaments into it. The filament should be a little longer and insert both ends into the holes that are together. Repeat this on the other side. The filaments should be placed crosswise and then add the lampshade. There are two tabs on the lampshade and attach the filament to them. Then pull the filaments slightly at the bottom and then cut them off. Glue everything together at the bottom to make it fixed.

Now we can put everything together and add glue to make it sufficiently fixed. Only the lamp can be put together without glue, but it is not suitable for carrying. Therefore, I advise gluing it together.

Assembly sketch: