Gingerbread Train

Another gingerbread holiday print to go along with my Gingerbread House.

----------------------------

A commercial license to sell printed copies is available on my Patreon:

https://www.patreon.com/busykikibee

As part of your membership you will also have access to exclusive files available only on Patreon.

----------------------------

Pictured frame and/or stand can be found over @CanadianGamer

https://makerworld.com/@CanadianGamer/collections/1027330

Project: Gingerbread Train
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.64mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

This print uses 7 unique filaments
PLA BambuLab Basic Black
PLA BambuLab Basic Brown
PLA Bambulab Basic Magenta or Red
PLA BambuLab Basic BambuLab Green
PLA BambuLab Matte Ice Blue
PLA BambuLab Basic Yellow
PLA BambuLab Matte Ivory White

Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Brown
At layer #12 (1.04mm) swap to Magenta or Red
At layer #14 (1.2mm) swap to BambuLab Green
At layer #15 (1.28mm) swap to Ice Blue
At layer #20 (1.68mm) swap to Yellow
At layer #22 (1.84mm) swap to Ivory White for the rest.