Wood pigeon call

Wood pigeon call

Whistle to mimic the sound of a wood pigeon (and some other pigeons and doves as well). Can also be used to mimic the rookooing sound of a male black grouse (for hissing black grouse sounds: https://makerworld.com/en/models/784942).

Look at my other animal calls:

https://makerworld.com/en/collections/3444293

Printing

The two whistles above is functional the same, only different on the outside. The simple one is easier to print, for the fancier one you should slow down your printer when reaching some heights if you have a bed slinger. (for example by putting custom “M220 S50” G-command at a certain height in the slicer. Makerworld removes custom g-commands from their print profiles). The fancier one also needs glue to glue the "pigeon plate" in front of it if you want it there.

Apart from the slowdown, I have printed it by using standard print settings, 0.4 nozzle, 0.2mm layer hight and 15% infill. For the fancier one, I recommend tree support manually applied to the “pigeon plate glue position”, its not needed for the angle but may be needed for the balance of the model. 

Sound

To use it, you whistle by blowing and at the same time using your hand as a cup in front of it to adjust the frequency.

Example sound: